Roof Access & Guardrails

Speak with a specialist at EnviroSafety today.

Non – Penetrating Rooftop Guardrails

We will audit, design and install a versatile non-penetrating guardrail system to make your building as safe as possible. Our guardrail system is engineered, tested and meets WorkSafeBC and OSHA guardrail requirements. This is a non-penetrating system, we don’t drill holes or breach your roof membrane, avoiding the potential for damage and water leaks.

The system provides excellent fall protection safety with an aesthetically pleasing architectural appeal. The unique and engineered design eliminates the need to use intermediate counterweights along the run, thereby eliminating the trip hazard. Available finishes include galvanised steel, hi-vis yellow powder coated or custom colour powder coat.

WE DESIGN, SUPPLY AND INSTALL THE RIGHT GUARDRAIL SOLUTION TO KEEP YOUR WORKERS SAFE

Universal Work Platforms

Our universal platform design is completely versatile and infinitely expandable. Attaching platforms, stairs and ladders is accomplished through common bolt hole patterns found on each side of the platform, eliminating the need for hot work on site.

No additional support is required for spans of 9’ (2743 mm) (3 platforms). When joining more than 4 platforms tower supports are required and bolt easily to the bottom of one or multiple platforms, regardless of stair location. Platforms feature a stamped, slip resistant surface which provides solid traction and won’t allow water puddling on the surface.

WE DESIGN, SUPPLY AND INSTALL THE RIGHT ACCESS PLATFORM SOLUTION TO KEEP YOUR WORKERS SAFE

Stairs

Our pre-engineered crossover stairs quickly configure to gain safe access over pipes, parapet walls, or other obstructions. Three platforms can be bolted together in a series without tower supports, providing up to 9′ of linear clearance.

Need additional clearance? 4 platforms can be bolted together by simply adding a tower support to each end. We can audit your area for specific size and specifications to provide you with the best solution.

WE DESIGN, SUPPLY AND INSTALL EFFECTIVE CROSSOVER STAIR SOLUTIONS

Fixed Ladders

Fixed ladders are an effective means to gain access to roofs and elevator penthouses. Our fixed ladders are designed and manufactured to meet WorkSafeBC and ANSI standards. Made from steel and galvanized, our ladders are available with or without a cage. Side rails provide 16” of clearance between them, rungs are 12” apart and provide grippage to prevent slips. The walk through at the top is 24” wide and extends 42” above the top rung. Our ladder installation team will ensure the correct ladder placement, toe spacing, and clearances are in place to keep your workers climbing safely.

When getting a fixed ladder to the desired area is restricted, we can manufacture 2 or 3 piece ladders in sections and attach them together once at its location.

WE’LL INSTALL YOUR LADDER RIGHT

Skylight Fall Protection

When working on roofs skylights can often be overlooked as a hazard, but don’t be fooled, unguarded skylights pose a real danger. Our skylight fall protection guards provide cost effective and easy-to- install protection from falls through skylights. They are available in many sizes, are OSHA compliant and provide worker safety.

The screen-style skylight covers do not penetrate the roof or skylight curb membranes, thereby maintaining the integrity of the roof and eliminating the potential for water leaks. Skylights with skylight guards eliminate the inherent danger that exists of falls through unguarded skylights.

WE CAN HELP MAXIMISE YOUR WORKERS SAFETY WHEN WORKING ON ROOFS

Permanent Rooftop Walkway

EnviroSafety can provide and install a complete roof access solution, including permanent walkways and stairs. The Kee® Walk system provides a safe, anti-slip, level walking surface for anyone who needs to access a roof in the course of their work. It provides a clear demarcation route which protects the roof surface from unnecessary damage and uniformly distributes the pedestrian load across its surface. The Kee® Walk system is designed for modern roof types including membrane, profiled and standing seam metal roofs. As it features adjustable brackets, delivered to site pre-assembled it can be used on flat, barrel and sloping roofs, with steps, longitudinal and traverse options allowing access to be created for virtually any roof configuration from 0 to 35 degrees. The modules are supplied as 5 foot (1.5m) and 10 foot (3m) pre-assembled sections to suit the requirements of different roofs. These lightweight modules are constructed from glass reinforced nylon treads attached to aluminium support beams that are fixed to the roof surface.

WE PROVIDE PERMANENT SOLUTIONS

Check Out Our Work

Contact Us

Have a quick question you need answered? Drop us a message and we will get back to you asap!

Not readable? Change text.