Envirosafety Confined Space | Fall Protection | Training Yes We Can 2017-05-31T16:10:14Z https://www.envirosafety.ca/feed/atom/ WordPress envirosafety <![CDATA[Consulting, Training, Equipment: The EnviroSafety 360° Fall Protection Solution]]> http://envirosafety.ca/?p=7206 2016-09-01T18:58:19Z 2016-09-01T18:57:23Z Each year, working accidents including falls and slip trips lead to hundreds of lost man hours in Canada. It is imperative for businesses susceptible to falling accidents to keep their workforce safe and reduce hours lost.

Consulting

According to WorkSafe BC, a fall protection scheme is required for any place from which a fall of 3m (10ft) or more may occur, or where a fall from a height of less than 3m but involves a risk of injury greater than that from the impact on a flat surface. From the definition, we can see that for certain areas, the severity of fall risk may not be immediately clear. At this point, it is crucial to first systematically identify and locate potential fall risks on your business’ premise, and evaluate the risks accordingly.

At EnviroSafety, our 360˚ fall protection solution will evaluate both the current fall protection systems in place as well as the challenges facing a business. We will work closely on site with company staff to examine the location and leave no gap unchecked. All recommendations regarding training and equipment shall be derived from the practical evaluation with consideration of the uniqueness of each site.

Training

Every company that works at height or has fall hazards should be trained for fall protection. We evaluate which one of your employees need fall protection training and get them certified with the right credentials. We offer training courses on a schedule that will fit your company needs. At EnviroSafety’s carefully designed facilities, trainees are required to experience exposure to heights and perform self rescue from vertical lifelines, preparing them from both skill and psychological perspective for any dangerous situation.

Equipment

We provide you with the necessary equipment based on the fall protection plan we have developed for you. We strive to provide safe and cost effective equipment selection to protect you and your business. As a secondary measure we want to make sure your workforce knows how to use the equipment, which is precisely why when combined with our training your workforce will be ready for potential hazards.

]]>
0
envirosafety <![CDATA[4 Ways to Improve Confined Space Safety at Your Workplace]]> http://envirosafety.ca/?p=7169 2016-08-29T16:55:28Z 2016-08-29T16:39:47Z As a director, supervisor, manager or business owner, you may not have realized that the health and safety of your employees could often be at risk when working inside confined spaces. According to Canadian Centre for Occupational Health and Safety, many lethal and non-lethal accidents take place within a confined space which multiplies the damage from fire, flooding, or poisonous gas. Make no mistake that confined spaces are everywhere – from pits and crawl spaces and tunnels to tanks and storage bins, from boilers to manholes and vaults… Without proper precautions, disaster could strike anytime.
Facing the challenge posed by confined spaces, a responsible employer should seriously consider the 4 aspects addressed by Envirosafety’s 360o confined space solution:

1. Have you identified all confined spaces at your workplace?

As mentioned above, confined spaces could be anywhere, and there are several definitions to help you identify them. Ensure that you check your local regulations for the specific criteria in your province. The Canadian Centre for Occupational Health and Safety provides a list of characteristics including poor air quality, chemical exposures, fire hazard, noise and extreme temperatures, etc. Also bare in mind that the confined spaces your employees face may not be located on your business premise, which makes them even trickier to track down and manage. The prudent way to go is to pre-identify all potential confined spaces your employees may be working in or around to prevent accidents before they occur.

2. Do you have an entry procedure and rescue plan?

An effective hazard assessment and entry procedures can help eliminate confined space incidents. When it comes to casualties in confined spaces, an estimated 60% of fatalities happen to the would-be rescuers after the actual incident. An effective entry procedure and rescue plan are crucial to protecting the lives of both the entrant and the potential rescuer. Remember that each confined space is unique, and using a generic template procedure may not be effective. At Envirosafety, our approach starts with: a comprehensive review of the number and type of confined spaces requiring entry, the kind of work that is done in the spaces, the types of hazards associated with the space itself as well as the hazards that will be created during work, and the access methods. The final assessments, procedures and rescue plans will be designed based upon a full review and site visit by our qualified consultants.

3. Did your employees receive proper training?

Once the plan is ready, it’s time to prepare your crew. In addition to learning the theory and procedures involved in the entry and rescue, your employees will be much better prepared with hands-on experience. At the Envirosafety training centre, we offer training programs ranging from 1 day up to 5 days. With the use of confined space simulators, equipment, procedures as well as hands-on practice drills, trainees perform confined space duties as they would for the actual situation. Before we train, Envirosafety will also evaluate your training requirements and can tailor the training based on your applications, making the most of your time and investment.

4. Do you have the right equipment?

Confined space entry and rescue is a complex challenge that requires specialized tools to do the job right. For example, for vault inspection alone the equipment can include a gas detector, blower, rescue retrieval system, harness, lighting, respirators, and various PPE. In addition, confined space equipment requires regular inspection, maintenance, recertification and calibrations to ensure compliance. Envirosafety offers expert opinions on the suitable equipment to get your job done safely.

]]>
0